Gypsum board mixer is one of the complete sets of equipment used to make gypsum board. Compared with traditional manual manufacturing, the gypsum board mixer can mix the raw materials evenly, and can improve production efficiency and quality. This article will introduce the working principle, structure and precautions of the gypsum board mixer.

1. Working principle

The complete equipment of gypsum board mixer is mainly composed of barrel body, mixer, transmission mechanism, support frame, motor and so on. When working, put an appropriate amount of water and gypsum powder into the barrel, start the motor, and the agitator starts to rotate, and the raw materials are mixed evenly to form the raw material of gypsum board. During the whole process, pay attention to controlling the ratio of water and gypsum powder to ensure that the mixture is even and does not appear lumpy or too thick.

2. Structural features

1. Barrel body: usually made of stainless steel or carbon steel, the capacity varies according to production requirements, generally between 200L and 1000L.

2. Stirrer: It is used to mix raw materials. It is mainly divided into two types: screw type and paddle type. Choose according to different mixing requirements.

3. Transmission mechanism: It is composed of a motor and a reducer, which is responsible for driving the agitator to rotate. Generally, hydraulic transmission or sprocket transmission is used.

4. Support frame: support the whole equipment, and play a role of fixing and stabilizing.

5. Motor: Three-phase asynchronous motor is usually used, and the power size also varies according to the equipment capacity and mixing requirements.

3. Precautions for use

1. Select suitable gypsum powder and water to ensure uniform mixing without affecting the quality of gypsum board.

2. Operate strictly according to the charging ratio, do not over or under, so as not to affect the mixing effect.

3. Equipment inspection and maintenance should be carried out before use to ensure that the equipment is normal and safe and reliable.

4. Do not reach into the barrel during work, so as not to be hurt by the agitator.

5. After shutting down, the equipment should be cleaned immediately for the next use. At the same time, it is necessary to check and maintain the equipment in time to prolong the service life.

In short, the complete set of gypsum board mixer is a very important equipment, and it needs to strictly abide by the operating procedures and precautions when using it to ensure production safety and quality.